- Compatible with PICMG 2.1, 2.16, and
2.9-compliant components
- Monitors via the Intelligent Platform
Management Bus (IPMB) protocol
- Provides isolated IPMI signals for each
slot for maximum security and reliability
- Out-of band management interface
- Hot swap support for IPMI based field
replaceable components
- Alarm cut off push button on the front
panel
- Standalone system monitoring: no driver
needed, independent OS
The MIC-3927 is a proprietary form
factor Chassis Management Module (CMM)
intended for use with PICMG* 2.1, 2.16,
and 2.9-compliant systems (the
CompactPCI* Hot Swap, Packet Switching
Backplane, and System Management
specifications respectively). The
MIC-3927 plugs into a dedicated slot in
compatible systems. It provides
centralized management and alarm
notification for system power supplies
and fans as well as single board
operation status. The CMM may be paired
with a backup for high-availability
applications.
The MIC-3927 is essentially a special
purposed single board computer with a
CPU, memory, PCI bus, operating system,
and peripherals. The MIC-3927 monitors
and configures IPMI-based components in
the chassis. When the thresholds for
temperature and voltage limitations are
reached or when failure occurs, the CMM
will capture store the events in an
event log. At the same time, it sends
SNMP traps, and drives the Telco alarm
relays which triggers the onboard LEDs.
The CMM can query FRU information (such
as serial number, model number,
manufacture date, etc.), detect presence
of components (such as fan tray, CPU
board, etc.), and perform operation
status monitoring of each component.
The MIC-3927 also has a built-in
web-based administration interface which
allows users to monitor the system’s
operation from any place with Internet
connectivity. The MIC-3927 adds another
dimension to the reliability of your
most critical applications.
*IPMI function only supported for
MIC-3390 and MIC-3392
